Universal Retrofit Pipe Flashings by Aztec Washer

Master Flash® Universal Retrofit

The Universal Retrofit has been designed to accommodate existing applications where a standard pull over flashing cannot be installed. The split design allows an easy wrap around fit with a single stainless steel clamp for sealing.

Check diameter of your pipe or duct and select appropriate Universal Retrofit Master Flash® to accommodate your application as indicated on the chart below. For extreme pitch or surface irregularity, select next larger size. Simply split the flashing at the designated area and close with the stainless steel clamp as instructed on the installation instructions.

UNIVERSAL RETROFIT MASTER FLASH®

WEATHER PROTECTION

Made of EPDM or Silicone, these flashings are compounded specifically formaximum resistance to weathering due to ozone and ultraviolet light.

EASY ON-SITE CUSTOMIZATION

Fast, one piece construction allows for easy on-site installation.

AVAILABLE IN BLACK, GREY OR SILICONE

FLEXIBLE BASE

Easily forms to contours of roof panel.

Sizing Chart
Check diameter of pipe. Select the appropiate Master Flash® for pipe or duct diameter. For extreme pitch or surface irregularity select next larger size. Choose the compound required, then refer to the part number for the Master Flash® desired.
	Pipe Size	Part Number	Flashing Details
#1	19 - 69mm	BLACK - MFRF1B	A-Top opening diameter	19mm (3/4”)
	(3/4”- 2-3/4” )	GREY - MFRF1G	B-Cut to suit pipe size	19 - 69mm (3/4” - 2-3/4”)
		SILICONE - MFRF1S	C-Base dimensions	160mm (6 - 3/10”)

#2	50 - 184 mm	BLACK - MFRF1B	A-Top opening diameter	50mm (2”)
	(2”- 7-1/4”)	GREY - MFRF1G	B-Cut to suit pipe size	50 - 184mm (2”- 7-1/4”)
		SILICONE - MFRF1S	C-Base dimensions	273mm (10-3/4”)

#3	95 - 254 mm	BLACK - MFRF1B	A-Top opening diameter	82mm (3-1/4")
	(3-1/4” - 10” )	GREY - MFRF1G	B-Cut to suit pipe size	82 - 254mm (3-1/4” - 10”)
		SILICONE - MFRF1S	C-Base dimensions	368mm (14-1/2”)

Flashing Detail

13821 Danielson St., Poway, California 92064 | 1-800-WASHER 5 (927-4375) | 1-858-513-4350 | Fax 1-858-513-4305

Master Flash®, Universal Master Flash®, Universal Retrofit Master Flash®, Retrofit Master Flash®, Residential Master Flash®,
Square Vent Retrofit Master Flash®, Master Seal® and Master Plug® are registered trademarks of Aztec Washer Company, Inc.
©2009-2011 Aztec Washer Company, Inc. | | Site Map | Privacy Statement