Standard Mini Master Flash Pipe Flashings by Aztec Washer

Master Flash® Square Base Mini

MASTER FLASH®SQUARE BASE MINI

WEATHER PROTECTION
Made of EPDM or Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.

EASY ON-SITE CUSTOMIZATION
Fast, one piece construction allows for easy on-site installation in minutes.

BASE FLEXIBILITY
The base is designed to form a seal on most panel configurations and roof pitch regardless of pipe location.

TWO COMPOUNDS

Availiable in two compounds to handle virtually all job applications

		EPDM 500	SILICONE

ADVANCED OZONE RESISTANCE tested to...		70 hour @ 500 pphm	70 hour @ 500 pphm

HIGH TEMPERATURE RESISTANCE

tested to	intermittent	• +135ºC (+275ºF)	• +260ºC (+55ºF)
	continuous	• +100ºC (+212ºF)	• +225ºC (+437ºF)

LOW TEMPERATURE RESISTANCE tested to…		• +50ºC (-65ºF)	• -74ºC (-100ºF)

TENSILE SET maximum…		10MPa (1450psi)	5 Mpa (700 psi)
COMPRESSION SET maximum…		25%	50%


Complete specification data and testing methods are availiable upon request

Sizing Chart
Check diameter of pipe. Select the appropiate Master Flash® for pipe or duct diameter. For extreme pitch or surface irregularity select next larger size. Choose the compound required, then refer to the part number for the Master Flash® desired.
	Pipe Size	Part Number	Flashing Details

Mini	3 - 19mm	Black - MFSMiniB	A-Top opening diameter	Closed
	1/8”– 3/4”	Grey - MFSMiniG	B-Cut to suit pipe size	3-19mm (1/8” – 3/4”)
		Silicone - MFSMiniS	C-Base dimensions	57mm (2 - 1/4”)

Flashing Detail

Phone: 03 9801 1000 | Fax: 03 9801 1055

Master Flash®, Universal Master Flash®, Universal Retrofit Master Flash®, Retrofit Master Flash®, Residential Master Flash®,
Square Vent Retrofit Master Flash®, Master Seal® and Master Plug® are registered trademarks of Aztec Washer Company, Inc.
©2009 Aztec Washer Company, Inc. | Site Map | Privacy Statement