HOME | ABOUT US | CERTIFICATIONS | CATALOGUE | CONTACT US | REQUEST QUOTE
 
 
  Translate This Page 
 

Catalogue

Products

Product Flyers

Aztec News

Who's Who

Green

Install Videos

 

Master Flash® Multiport

MASTER FLASH® MULTIPORT

WEATHER PROTECTION

Made of EPDM or Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.

BASE FLEXIBILITY

The base is designed to form a seal on most panel configurations and roof pitch regardless of pipe location.

  • Easy install stainless steel Gripper to secure a retro custom fit.
  • No hassle stainless steel Gripper to secure retrofit applications Included.
  • Accommodates FOUR 6mm (1/4") lines and 1 pipe 6mm - 70mm (1/4" - 2-3/4").
  • Up to 4 Cables or Wires per flashing.
  • 4 Built in Cable or Wire ports for a secure fit.

EPDM RUBBER IS AVAILABLE IN BLACK OR GREY

SILICONE IS AVAILABLE IN RED SILICONE IS AVAILABLE IN RED

CUSTOM COLOURS AVAILABLE UPON REQUEST, ADDITIONAL COST MAY APPLY.

Availiable in two compounds to handle virtually all job applications
EPDM 500 SILICONE
ADVANCED OZONE RESISTANCE tested to... 70 hour @ 500 pphm 70 hour @ 500 pphm
HIGH TEMPERATURE RESISTANCE
tested to intermittent • +135ºC (+275ºF) • +260ºC (+55ºF)
continuous • +100ºC (+212ºF) • +225ºC (+437ºF)
LOW TEMPERATURE RESISTANCE tested to… • +50ºC (-65ºF) • -74ºC (-100ºF)
TENSILE SET maximum… 10MPa  (1450psi) 5 Mpa (700 psi)
COMPRESSION SET maximum… 25% 50%
Complete specification data and testing methods are availiable upon request
 
Sizing Chart
Check diameter of pipe. Select the appropiate Master Flash® for pipe or duct diameter. For extreme pitch and surface irregularity refer to the Master Flash® Extreme Angle range.. Choose the compound required, then refer to the part number for the Master Flash® desired.
  Pipe Size Part Number Flashing Details
MULTII-PORT STANDARD RETROFIT   A-Top opening diameter Closed
6 - 70mm 25 - 57mm BLACK - MFMP1B B -Overall Height 57mm (2-1/4”)
1/4"-2-3/4" 1-1/4"-2-1/4" SILICONE - MFMP1S C-Base dimensions 114mm (4-1/2”)
2 PORTS
1/4" - 3/8"
6 - 96mm

Flashing Detail

   
 
   
 
 
 
Phone: 03 9801 1000 | Fax: 03 9801 1055

Master Flash®, Universal Master Flash®, Universal Retrofit Master Flash®, Retrofit Master Flash®, Residential Master Flash®,
Square Vent Retrofit Master Flash®, Master Seal® and Master Plug® are registered trademarks of Aztec Washer Company, Inc.
©2009 Aztec Washer Company, Inc. | Site Map | Privacy Statement
 
  Internet Marketing and Lead Generation