#2 Vent Master Flash Pipe Flashing by Aztec Washer

#2 Vent Master Flash® Pipe Flashing

Accommodates 50 - 70mm pipes

WEATHER PROTECTION
Made of EPDM or Silicone, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.

EASY ON-SITE CUSTOMIZING
Fast, one piece construction allows for easy on-siteinstallation in usually 5 minutes.

BASE FLEXIBILITY
The base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location.


TWO COMPOUNDS / 2 COLOURS

Availiable in two compounds to handle virtually all job applications

		EPDM 500	SILICONE

ADVANCED OZONE RESISTANCE tested to...		70 hour @ 500 pphm	70 hour @ 500 pphm

HIGH TEMPERATURE RESISTANCE

tested to	intermittent	• +135ºC (+275ºF)	• +260ºC (+55ºF)
	continuous	• +100ºC (+212ºF)	• +225ºC (+437ºF)

LOW TEMPERATURE RESISTANCE tested to…		• +50ºC (-67ºF)	• -74ºC (-101ºF)

TENSILE SET minimum…		10MPa (1450psi)	5 Mpa (700 psi)

Complete specification data and testing methods are availiable upon request


Sizing Chart

Check diameter of pipe. Select the appropiate Master Flash® for pipe or duct diameter. For extreme pitch or surface irregularity select next larger size. Choose the compound required, then refer to the part number for the Master Flash® desired.

	Pipe Size	Color	Part Number	Flashing Details
#2-VENT	50 - 70mm	Black EPDM	MFS2B	A-Top opening diameter	Closed
	2" - 2-3/4"	Grey EPDM	MFS2G	B-Cut to suit pipe size	3-19mm (1/8” – 3/4”)
		Red Silicone	MFS2S	C-Base dimensions	57mm (2 - 1/4”)

13821 Danielson St., Poway, California 92064 | 1-800-WASHER 5 (927-4375) | 1-858-513-4350 | Fax 1-858-513-4305

Master Flash®, Universal Master Flash®, Universal Retrofit Master Flash®, Retrofit Master Flash®, Residential Master Flash®,
Square Vent Retrofit Master Flash®, Master Seal® and Master Plug® are registered trademarks of Aztec Washer Company, Inc.
©2009-2011 Aztec Washer Company, Inc. | Site Map | Privacy Statement